3 Series E46 320d (M47TU) SAL
51 47 065
Removing and installing/replacing finishing
strip at front left or right entrance
Carefully lever out finishing strip (1)
with special tool 00 9 318 (universal wedge)
from clips (2) towards top.
If necessary, lever clips out of entrance with pliers (head of pliers
surface-ground).
If necessary, replace damaged clips.
Foam tape (1) must be fitted.
Push clips (2) onto finishing strip (3) and align.
RA Removing and installing/replacing finishing strip at front left or right entranc
BMW AG - TIS
12.02.2013 22:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -