3 Series E46 320d (M47TU) SAL
Unclip A-pillar wiring harness from retaining lugs of retainer, trim
panel, A-pillar.
Position of retaining clips, retainer, trim panel, A-pillar.
Important!
When removing retainer, trim panel, A-pillar, it is absolutely
essential to avoid
-
damage to paintwork,
-
damage to retainer, trim panel, A-pillar,
-
damage to windshield,
-
damage to ITS head airbag!
Remove retainer, trim panel, A-pillar.
To do so, insert screwdriver (2) in area of retaining clip between
retainer, trim panel, A-pillar (1) and body (3) and unclip retaining
clip.
Perform this procedure on all retaining clips.
Installation:
Replace all retaining clips that have been removed.
1.
retainer, trim panel, A-pillar
2.
Screwdriver
3.
Body (A-pillar)
Remove ITS head airbag.
RA Removing and installing / replacing left or right ITS head airbag (model without
BMW AG - TIS
13.02.2013 03:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 18 -