3 Series E46 320i (M52TU) SAL
Installation:
Sealing faces clean and free of seal debris.
Check seal, replace if necessary.
Apply Drei Bond 1209 sealing compound to area around joint
(refer to BMW Parts Service): approx. 3 mm wide and 2 mm
high.
Installation:
To prevent any possibility of torsion stress during subsequent
transmission assembly, align oil sump flush with side of
transmission.
RA Removing and installing, sealing / replacing oil sump (M52 / S52 / M52TU)
BMW AG - TIS
12.02.2013 23:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
