3 Series E46 320i (M52TU) SAL
Unscrew suspension eye.
Release nuts and remove double VANOS adjustment unit.
Important!
With double VANOS adjustment unit removed:
Do not crank engine.
The toothed shaft on the inlet side may move and slip out of
the spline teeth, the inlet camshaft is thus no longer non-
positively connected and the valves could rest on the piston.
Installation:
Installation of double VANOS adjustment unit is described
separately from removal. Assembly sequence for removal and
installation is different.
RA Removing and installing or replacing double VANOS adjustment unit (M52TU / M54 /
BMW AG - TIS
13.02.2013 00:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
