3 Series E46 320i (M52TU) SAL
If necessary, remove control piston.
Press sleeve downwards with suitable drift.
Caution!
The sleeve for the control plunger is under spring pressure.
Remove circlip.
Installation:
1.
Control plunger
2.
Spring
3.
Sleeve
4.
O-ring (replace)
5.
Circlip
RA Removing and installing/replacing oil pump (M52TU / M54 / M56)
BMW AG - TIS
13.02.2013 00:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -