bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Replacing Solenoid Valve Or Pressure Regulator (A5S 325Z)|Page 1243 > < 5 RA Replacing All Solenoid Valves (A4S 270R_ 310R)|Page 1241
Page 1
background image

24 34 859

Replacing solenoid valve or pressure
regulator (A5S 325Z)

Note:

After completing work, top up ATF level.

Check/top up fluid level in automatic transmission,

refer to 00 11 500.

Transmission oil sump removed.

Remove and install transmission oil sump,

refer to 24 11 003.

Caution!

It is absolutely essential to use the approved automatic
transmission fluid in this automatic transmission,

refer to BMW Operating Fluids MG 24.

Failure to comply with this requirement will result in serious
damage to the automatic transmission.

1. 

Solenoid valve 3

2. 

Solenoid valve 2

3. 

Pressure regulator 3

4. 

Pressure regulator 4

5. 

Pressure regulator 2

6. 

Solenoid valve 1

Detach plug (1) from solenoid valve or pressure regulator.

RA  Replacing solenoid valve or pressure regulator (A5S 325Z)

BMW AG - TIS

13.02.2013  02:28

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Replacing Solenoid Valve Or Pressure Regulator (A5S 325Z)|Page 1243 > < 5 RA Replacing All Solenoid Valves (A4S 270R_ 310R)|Page 1241