3 Series E46 320i (M52TU) SAL
View from vehicle interior:
Remove anti-drumming lining in area (1) and open weld joints.
Remove anti-drumming lining in area (2).
View from luggage compartment:
Open weld joints in area (1).
Open welding spots in areas (1) on new rear axle carrier part.
Remove carrier plate (2).
Drill all connection points on carrier plate (2) for plug welding.
Open all weld joints in areas (3) and drill for plug welding.
Drill areas (1) for plug welding.
RA Replacing rear axle carrier
BMW AG - TIS
13.02.2013 06:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
