3 Series E46 320i (M54) TOUR
11 28 050
Replacing A/C compressor drive belt (M52 /
S52 / M52TU / M54 / M56)
Note:
If the drive belt is to be subsequently reused:
Mark direction of travel and reinstall drive belt in same direction of
travel.
Necessary preliminary tasks:
•
If necessary, remove splash guard.
Model with hydraulic drive belt and tension jack:
Remove the dust cab. Push back belt tensioner at bolt connection
of guide pulley and remove drive belt.
Model with mechanical drive belt and tension jack:
Press back drive belt tensioner at hexagon head or Torx socket
and remove drive belt.
Important!
Drive belt must be replaced if fouled with hydraulic fluid.
Installation:
Check drive belt for coolant and oil residues, replace if necessary.
Install drive belt, make sure it is correctly positioned on belt
pulleys.
RA Replacing A/C compressor drive belt (M52 / S52 / M52TU / M54 / M56)
BMW AG - TIS
13.02.2013 04:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -