3 Series E46 320td (M47TU) COMP
Installation:
M47TU:
Crankshaft and balancing shaft must be positioned towards each
other.
Set engine with special tool 11 2 300 .
Installation:
M47TU2:
Crankshaft and balancing shaft must be positioned towards each
other.
Set engine with special tool 11 5 180 .
Set balancing shaft unit with special tool 11 3 340 or with a
mandrel (d=5 mm).
Installation:
Use new, degreased and deoiled screws.
Tapped holes on balancing shaft unit must also be degreased and
deoiled.
RA Removing and installing or replacing oil pump (M47TU / M47TU2)
BMW AG - TIS
13.02.2013 05:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
