3 Series E46 320td (M47TU) COMP
Detach vacuum hose from vacuum unit of turbocharger.
Installation:
Layout of vacuum hoses.
Remove sealing cover (1) from heat shield.
Pull out seal plug.
Installation:
Retaining clip (1) on sealing cover (2) must be inserted at
heat shield.
Installation:
Replaced damaged seal plugs.
Insert three seal plugs (1) from above.
RA Removing and installing or replacing exhaust turbocharger (M47TU)
BMW AG - TIS
13.02.2013 05:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -