bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing Or Replacing Exhaust Turbocharger (M47TU)|Page 690 > < 1 RA Removing And Installing, Sealing_replacing Exhaust Manifold (M47TU _ M47T2)|Page 688
Page 1
background image

11 65 020

Removing and installing or replacing exhaust
turbocharger (M47TU)

Warning!

Scalding hazard!

Only perform these tasks on an engine that has cooled down.

Caution!

If the charge air hoses are not fitted without grease and dry,
this will result in supercharger failure.

Fit charge air hoses without grease and dry.

Remove fan cowl.

Remove air cleaner element.

Remove primary catalytic converter.

Release cable and hose on intake pipe.

Release screws.

Detach intake pipe with bypass hose.

RA  Removing and installing or replacing exhaust turbocharger (M47TU)

BMW AG - TIS

13.02.2013  05:33

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing Or Replacing Exhaust Turbocharger (M47TU)|Page 690 > < 1 RA Removing And Installing, Sealing_replacing Exhaust Manifold (M47TU _ M47T2)|Page 688