3 Series E46 320td (M47TU) COMP
Note:
For M47TU engine.
Release screws.
Lift off acoustic cover.
Drain coolant from radiator.
Installation:
Vent cooling system and check for leaks.
Detach clamp (1) from EGR cooler.
Installation:
Tightening torque, 11 71 1AZ.
Release screw (2) of holder for EGR cooler.
Follow instructions for working on cooling system.
Unlock coolant hose (2) and detach from thermostat.
Detach clamp (3) from EGR cooler (1).
Installation:
Tightening torque, 11 71 1AZ.
Release hose clamp (4).
Detach coolant hose from EGR cooler (1).
Release screw connections of holder for EGR cooler.
Remove EGR cooler (1).
RA Removing and installing/replacing EGR cooler (M57 / M47TU)
BMW AG - TIS
13.02.2013 05:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -