3 Series E46 320td (M47TU) COMP
13 61 501
Replacing control unit (DDE) for M47TU
Follow instructions for removing and installing electronic
control units.
Refer to general information in MG12.
Read fault memory of DDE control unit. Switch off ignition.
Observe instructions for disconnecting and connecting battery.
Refer to general information in MG12.
Disconnect and cover battery negative lead.
Installation location of control unit:
In electronics box in direction of travel on left.
Release screws (1) and remove cover.
Tightening torque, 12 90 4AZ.
Disconnect plug connections (1) from DDE control unit.
Withdraw control unit from electronics box.
RA Replacing control unit (DDE) for M47TU
BMW AG - TIS
13.02.2013 06:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -