3 Series E46 320td (M47TU) COMP
18 00 020
Removing and installing complete exhaust
system (M47, M47TU)
Warning!
Scalding hazard!
Only perform these tasks on an engine that has cooled down.
Remove splash guard from unit.
Remove front end reinforcement (1),
refer to 31 12 046.
Remove heat shields (2/3).
Release hexagon nuts (1/2) and remove reinforcement (3).
Release hexagon nuts (5) and remove reinforcement (6).
Bracket (4) can remain on transmission.
Release hexagon nuts (1). Detach primary catalytic converter (2)
towards rear from turbocharger.
Check sealing surfaces, clean if necessary.
Installation:
Replace self-locking nuts.
Coat thread with copper paste, refer to BMW Parts Service.
RA Removing and installing complete exhaust system (M47, M47TU)
BMW AG - TIS
13.02.2013 06:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -