3 Series E46 320td (M47TU) COMP
Installation:
Check lubrication of transmission input shaft for sticky
consistency. If grease is sticky, replace clutch plate.
Check clutch plate for friction rust in taper splines and replace
if necessary.
Refer to 21 21 500.
Mechanically remove old grease and lining abrasion from the
taper splines of the clutch disc (with a cloth).
Then, using a brush, apply a thin, even coat of grease over
entire area of taper splines, taper groove and guide pin.
Grease,
refer to BMW Service Operating Fluids.
RA Removing and installing transmission (GS5-39DZ, M47TU / M57)
BMW AG - TIS
13.02.2013 07:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
