3 Series E46 320td (M47TU) COMP
Caution!
In E39 vehicles with M57 engines, remove complete
automatic transmission.
To avoid damage to the automatic transmission: position the
transmission on the assembly stand for the entire operation
(output flange facing upwards).
Note:
The automatic transmissions in question each have an
adhesive label on the extension housing at the rear (see fig.).
Version 1 without spring washer:
Grip output flange (1) with special tool 23 0 020 .
Release hexagon nut.
Tightening torque, 24 21 1AZ.
Detach output flange (1).
Installation:
Replace sealing ring in output flange (1).
Install hexagon nut with screw retaining compound.
Version 2 with spring washer:
Release hexagon nut (1) on output flange (2).
Tightening torque, 24 21 1AZ.
Installation:
Install hexagon nut with screw retaining compound.
RA Removing and installing or replacing transmission extension housing (A5S 360R /
BMW AG - TIS
13.02.2013 07:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -