3 Series E46 320td (M47TU) COMP
Fit reinforcement plates (top/bottom), locate in position and weld
up.
Grind down welded surfaces.
Coat connection faces on body and coat with zinc dust paint.
Install shaped part for cavity bulkhead, cowl panel, side, top.
Procedure and materials,
refer to 41 00 ... Installing shaped parts for cavity bulkhead, except
cover for side member
Short summary:
Clean bearing surface of shaped part for cavity bulkhead on body
and on cowl panel spare part.
1 = Lug for securing shaped part
Clean shaped part for cavity bulkhead (2).
Coat shaped part for cavity bulkhead (2) with recommended
window adhesive and attach to retaining lug (1).
RA Replacing left or right cowl panel (partial replacement in front of roof connect
BMW AG - TIS
13.02.2013 11:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -