3 Series E46 320td (M47TU) COMP
51 43 201
Removing and installing / replacing trim for
front left or right roof pillar trim (compact)
Warning!
Version with head airbag:
Follow safety instructions for working on cars with airbag
systems.
Caution!
Do not use sharp-edged tools to remove trim (risk of damage
to head airbag).
Lever out emblem (1) and release screw underneath.
Remove mucket from front roof pillar (A-pillar finisher).
Lever panel (2) inwards out of grommet (3).
Lever panel (2) inwards/upwards out of instrument panel (4) and
remove.
Installation:
Tightening torque 51 43 2AZ.
Installation:
Following parts of panel (4) must not be damaged:
1
Tabs
2
Tabs
3
Reinforcement for screw
Warning!
Grommet (1) must not be damaged, replace if necessary.
Guide tab (2) must point to windshield (3). Do not jam head
airbag (4) when installing panel.
RA Removing and installing / replacing trim for front left or right roof pillar tri
BMW AG - TIS
13.02.2013 13:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -