3 Series E46 320td (M47TU) COMP
Move backrest into installation position and pull out belt slightly.
Clamp belt firmly.
E46 only:
Unfasten screws.
Remove trim.
E83 only:
Trim not screwed down.
Lever out trim with special tool 00 9 317 .
Separate webbing.
Installation:
Feed out strap so that belt stopper (1) is located between upper
guide (2) and lower guide (3) of belt finisher.
Lever cover with trim wires (1) out of metal clutches (2).
RA Replacing backrest cover for rear seat (through-loading system) on left
BMW AG - TIS
13.02.2013 14:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -