3 Series E46 320td (M47TU) COMP
64 51 590
Removing and installing/replacing evaporator
Note:
Heater is removed.
Remove heating element.
Remove output stage/switch for blower of heater - A/C.
Withdraw temperature sensor (1).
Disconnect plug connection (2).
Unclip linkage (3) on servodrive.
Unlock servodrive (1), remove and disconnect plug connection.
Release screw (2).
Unlock plate (3) (see magnifying glass) and remove.
Installation:
Insert lugs (4) first.
Unclip wiring harness.
RA Removing and installing/replacing evaporator
BMW AG - TIS
13.02.2013 19:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
