3 Series E46 323Ci (M52TU) COUPE
Remove compression springs (1) and cylinder pins (2).
Remove locking stops and ball stops (3) (5 off) with help of a
magnet (4).
Note:
Note locking pin (1) in the central selector rod!
Locking pin (1) on middle selector rod (2) must locate in centre of
selector rod.
Note:
To secure the position of the locking pin (1), the transmission
must be shifted into 2nd gear.
RA Complete removal and installation of input and output shafts (S5D 200G/ 250G)
BMW AG - TIS
13.02.2013 07:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -