3 Series E46 323Ci (M52TU) COUPE
Version 2 with spring washer:
Remove spring washer (1).
Remove output flange (2).
Installation:
Note installation direction of spring washer (1).
Withdraw radial seal (1) with special tool 00 5 010 .
Installation:
Coat sealing lips of new radial seal with automatic
transmission fluid. Drive in radial seal with special tool
24 1 090 until flush.
RA Replacing radial seal for output flange (A5S 360R / 390R)
BMW AG - TIS
13.02.2013 08:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -