3 Series E46 323Ci (M52TU) COUPE
51 14 110
Removing and installing/replacing rear model
designation
Important!
The "Instructions for number/letter combination cementing"
serve as the basis for these repair instructions and must be
followed without fail.
Fitting dimensions for Saloon:
Stick on adhesive tape up to top edge "A" and mark out measurement "B".
Saloon 316 i ... 330 i:
A= 50 mm
B= 25 mm
Saloon 318 d ...330 d:
A= 50 mm
B= 25 mm
Fitting dimensions for Coupé and Convertible:
RA Removing and installing/replacing rear model designation
BMW AG - TIS
13.02.2013 14:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -