3 Series E46 323Ci (M52TU) COUPE
63 14 120
Removing and installing/replacing reflecting
tail light on rear bumper (coupé, convertible)
Note:
Once the bumper (1) has been pressed on, the reflecting tail
light (2) is forced out by spring force.
Press bumper (1) in center upwards and
remove reflecting tail light (2) towards rear/top.
Installation:
Insert reflecting tail light (2) at bottom into bumper (1) and press
top/center against reflecting tail light (2) until it snaps into place in
bumper (1).
Installation:
Fixtures (1) and springs (2) on reflecting tail light (3) must not
be damaged.
Installation:
Fixtures (1) in bumper (2) must not be damaged.
RA Removing and installing/replacing reflecting tail light on rear bumper (coupé, c
BMW AG - TIS
13.02.2013 21:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -