3 Series E46 325Ci (M54) CONVER
23 42 520
Replacing pressure accumulator GS5S31BZ
(SMG)
Note:
After completing work:
Proceed according to test program.
refer to "Service Functions" in DIS Tester.
Check fluid level in hydraulic system.
Important!
Depressurize hydraulic system.
Proceed according to "Service Functions" in DIS Tester.
Remove heat shield from valve block.
Release screw (1).
Release screws (3) on protecting plate (2).
Tightening torque, 23 41 8AZ .
Release screws (4) on protecting plate (2).
Tightening torque, 23 41 7AZ .
Release pressure accumulator at hexagon head (1).
Tightening torque, 23 41 6AZ .
Remove pressure accumulator.
RA Replacing pressure accumulator GS5S31BZ (SMG)
BMW AG - TIS
13.02.2013 14:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -