3 Series E46 325Ci (M54) CONVER
51 37 240
Removing and installing/replacing outer
window cavity cover strip for door window,
rear left or right
Special tools required:
•
00 9 311
Note:
Window cavity cover strip on outside and inside forms a single
part and can only be replaced as such.
Remove upper section of side trim at rear.
Release clips (1) and detach adhesive tapes (2) of seal (3).
Attach adhesive tape (1) under window cavity cover strip (2)
(damage to paintwork).
Using special tool 00 9 311 and proceeding from rear to front,
lever out window cavity cover strip (2) on outside.
Detach window cavity cover strip (3) on inside and remove
completely.
RA Removing and installing/replacing outer window cavity cover strip for door windo
BMW AG - TIS
13.02.2013 23:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -