3 Series E46 325Ci (M54) CONVER
Release screws (1...2) of coupling gear and unclip cable from
guides.
E46: Tightening torque 72 11 18AZ
.
E64: Tightening torque 72 11 07AZ
.
Note:
Replace driver (1) after removal with a new component as
damage cannot be excluded.
When removing driver (1), ensure guide (3) and lever (2) of
coupling gear are not damaged.
Remove driver (1) from backrest shaft.
Installation:
Do not fit new driver (1) on backrest shaft yet.
Backrest must be in as vertical a position as possible.
Driver (1) and lug are positioned at an angle towards top in
direction of travel (arrow).
Installation:
Feed driver (1) into slot (3) in lever (2) of coupling gear.
Align lever (2) on coupling gear so that slot (3) is correctly
positioned with respect to driver (1).
RA Removing and installing/replacing front seat belt
BMW AG - TIS
14.02.2013 18:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
