3 Series E46 325Ci (M54) COUPE
11 13 000
Removing and installing, sealing or replacing
oil sump (M52TU / M54 / M56)
Special tools required:
•
00 0 200
•
00 0 201
•
00 0 202
•
00 0 204
•
00 0 208
Note:
To remove the oil sump, you must lower the front axle support.
There is no need to perform a front axle alignment check.
Assemble special tool 00 0 200 with special tools 00 0 201 /
00 0 202 / 00 0 204 / 00 0 208 and fit.
Secure special tool 00 0 200 to front suspension eye on engine.
Note:
The supports (1) of special tool 00 0 208 must rest on the bolt
connection of both side walls.
Tighten the screws (1 and 2).
RA Removing and installing, sealing or replacing oil sump (M52TU / M54 / M56)
BMW AG - TIS
17.02.2013 13:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
