3 Series E46 325Ci (M54) COUPE
Insert screws (1) on exhaust side and initially tighten to approx.
5 Nm.
Initially tighten nuts (2) on exhaust side and nuts (3) on inlet side
to approx. 5 Nm.
Tighten down screws (1) on exhaust side.
Tightening torque 11 31 3AZ
.
Tighten down nuts (2) on exhaust side and nuts (3) on inlet side.
Tightening torque 11 31 11AZ
.
RA Adjusting camshaft timing (M52TU / M54 / M56)
BMW AG - TIS
17.02.2013 13:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
