3 Series E46 325Ci (M54) COUPE
When fitted:
Remove vacuum tank for exhaust flap.
Unlock plug (1) and detach from pulse generator for crankshaft.
Release nuts (1).
Tightening torque, 12 41 4AZ.
Detach leads (2) from starter motor.
Unlock plug (1) and detach from coolant temperature sensor.
Release cable tie (2).
Disconnect plug connection (1).
E53 only:
Release cable tie (2) on transmission housing and disconnect
cable (3).
RA Replacing wiring harness section for engine (M54)
BMW AG - TIS
17.02.2013 14:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -