3 Series E46 325Ci (M54) COUPE
23 42 550
Replacing hydraulic pump GS6S37BZ (SMG)
Important!
Before working on hydraulic system:
-
Disconnect hydraulic pump relay in electronics box
Do not reconnect relay for entire duration of repair work
-
Reduce pressure in hydraulic system by means of
Service Function in DIS Tester
Installation:
Replace hydraulic pump relay.
Note:
After completing work:
-
Check fluid level in hydraulic system by means of DIS Tester
"Service Function"
-
Perform "Bleed hydraulic system" service function by
means of DIS Tester
-
Perform "Teach in transmission" service function by means
of DIS Tester
Necessary preliminary tasks:
•
Remove assembly underside protection (E60).
Release nuts and remove heat shield (1).
Tightening torque 23 41 14AZ
.
RA Replacing hydraulic pump GS6S37BZ (SMG)
BMW AG - TIS
17.02.2013 16:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -