3 Series E46 325Ci (M54) COUPE
Important!
In case of replacement or partial detachments, lay 6 mm dia.
butylene tape (sourcing reference: BMW Parts Service)
depending on the conditions on inner door panel or sound
insulation.
Seal cable penetrations with butylene tape.
Sound insulation must be bonded completely (i.e. without
interruption) with butylene tape, otherwise moisture will get
into the passenger compartment (leakage).
Note:
Position of butylene tape (1) on inner door plate.
Note:
Position of butylene tape (1) on sound insulation (2).
Important!
When working with adhesive cleaners in enclosed rooms:
Ensure room is well ventilated.
Adhesive areas must be dry and free of dust and grease.
After cleaning, do not touch the adhesive areas with bare
hands (leakage).
If necessary, clean the specified adhesive area with adhesive
cleaner (sourcing reference: BMW Parts Service).
Air drying time: 1 minute
RA Removing and installing/replacing sound insulation in left or right front door (
BMW AG - TIS
18.02.2013 01:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
