3 Series E46 325Ci (M54) COUPE
Disconnect plug for ITS head airbag gas generator,
refer also to 72 12 ... Unlocking/locking airbag plug connections
Unfasten nut.
Remove ITS head airbag gas generator.
Installation:
Replace self-locking nut.
Tightening torque,
refer to Technical Data 72 12 6AZ
1.
Bore for accommodating threaded pin of gas generator, ITS
head airbag, on support tube for instrument panel
2.
Locating pin on gas generator, ITS head airbag, for securing
to support tube for instrument panel
Installation:
The threaded pin for securing the ITS head airbag gas
generator to the support tube for the instrument panel must be
secured in place in the bore hole in the ITS head airbag gas
generator (1).
The retaining pin on the ITS head airbag gas generator must
be secured in place in the bore hole in the support tube for
instrument panel (2).
RA Removing and installing / replacing left or right ITS head airbag (model without
BMW AG - TIS
18.02.2013 05:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
