3 Series E46 325Ci (M56) COUPE
16 12 010
Removing and installing/replacing carbon
canister (M56, automatic)
Remove gravel guards (1) and (2).
Release screw connections (1) and (3).
Tightening torque (1), 16 12 13AZ.
Tightening torque (2), 16 12 14AZ.
Detach line (2).
Installation:
Push seal (1) with low-surface-tension water onto plug (2) first.
Then connect plug (2) to carbon canister.
Release screws (1) and pull out carbon canister towards bottom.
Tightening torque, 16 13 2AZ
.
RA Removing and installing/replacing carbon canister (M56, automatic)
BMW AG - TIS
13.02.2013 21:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -