3 Series E46 325i (M54) TOUR
23 00 022
Removing and installing transmission
(S5D 200G, S5D 250G, M52TU/M54)
Special tools required:
•
00 1 450
•
11 8 022
•
23 0 170
Caution!
After completion of work, check transmission fluid level.
Use only approved transmission oil.
Failure to comply with this instruction will result in serious
damage to the transmission.
Necessary preliminary tasks:
•
Disconnect battery
•
Remove reinforcement plate and underbody protection
•
Remove the entire exhaust system
•
E46 only: Remove heater bulkhead
•
E46 only: Remove intake hood.
Remove heat shield (1).
RA Removing and installing transmission (S5D 200G, S5D 250G, M52TU/M54)
BMW AG - TIS
14.02.2013 01:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
