3 Series E46 325i (M54) TOUR
Adjust the replacement part to fit, determine and mark the
separating point.
Remove the spare part.
Separate the replacement part.
Determine and mark out cutting lines on rear side panel spare
part.
Determine and mark out cutting line for C-pillar.
A = 200 mm from roof edge.
Determine and mark out cutting line for D-pillar.
Distance (A) = 10 mm from bore for support, ball head, gas-filled
strut.
RA Replacing rear left side wall (part replacement C- and D-pillar, top) (touring)
BMW AG - TIS
14.02.2013 11:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
