3 Series E46 325i (M54) TOUR
52 26 005
Removing and installing/replacing rear seat
(through-loading system)
4-door models only:
Unclip rear seat on left/right towards top.
For op. ext. seat heating only:
Disconnect cable.
Lift out seat.
Installation:
Feed belt buckles and lap belt (1) through intended openings into
correct position.
2-door models only:
Unclip rear seat on left/right towards top.
For op. ext. seat heating only:
Disconnect cable.
Pull out seat (if necessary under armrests) towards front.
Installation:
Feed belt buckles and lap belt through intended openings into
correct position.
If necessary, make sure ISOFIX covers are correctly engaged.
RA Removing and installing/replacing rear seat (through-loading system)
BMW AG - TIS
14.02.2013 13:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -