bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing Air Intake Manifold (M56)|Page 635 > < 1 RA Removing And Installing_replacing Coolant Thermostat (M52TU _ M54 _ M56)|Page 632
Page 1
background image

11 61 050

Removing and installing air intake manifold
(M56)

Necessary preliminary tasks:

Instructions for disconnecting and connecting battery.

Disconnect negative battery lead.

Remove suction-filter housing.

Remove intake pipe.

Remove microfilter.

Open cable duct on lower section of microfilter housing (2) and
feed out cable(s).

Release screws (1) and remove lower section of microfilter
housing (2).

Remove engine cover.

Unclip plug connections (1 and 2) from holders.

Unlock and detach vent hose (3).

Unlock and detach terminal strip (4).

Release nut on battery positive lead.

RA  Removing and installing air intake manifold (M56)

BMW AG - TIS

14.02.2013  07:41

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing Air Intake Manifold (M56)|Page 635 > < 1 RA Removing And Installing_replacing Coolant Thermostat (M52TU _ M54 _ M56)|Page 632