3 Series E46 325i (M56) TOUR
Instructions for removing and installing fuel hoses.
Caution!
Catch and dispose of fuel as it escapes.
Release fuel line (1).
Release screws and detach injection pipe (2) towards top.
Unlock and detach plug connection (1).
Release vacuum line (2).
Release screw on oil dipstick guide tube (3) and turn guide
tube (3) to one side.
Pull off sealing strip (1) towards top.
Turn fasteners (1) through 90
°
and release.
Detach electrical leads with profile seals from assembly
compartment partition wall towards top.
Remove assembly compartment partition wall (2) towards top.
Installation:
Check installation position of profile seal.
RA Removing and installing air intake manifold (M56)
BMW AG - TIS
14.02.2013 07:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -