3 Series E46 325i (M56) TOUR
Remove engine cover.
Note:
Removal is described separately from installation.
Removal:
Unclip plug connections (1 and 2) from holders.
Remove holders from plug connections (2).
Unlock and detach vent hose (3).
Unlock and detach terminal strip (4).
Caution!
Catch and dispose of fuel as it escapes.
Release fuel line (5).
Slacken union nuts along line.
Unfasten screws.
Lift out injection pipe (1).
Note:
Union nut (1) and injector (2) cannot be separated.
Release union nut (1) and remove injector (2).
Note:
This procedure is applicable to all injectors.
RA Replacing complete injection pipe (M56)
BMW AG - TIS
14.02.2013 09:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -