3 Series E46 325i (M56) TOUR
Installation:
Initially tighten union nut (1) loosely.
Note:
This procedure is applicable to all injectors.
Push special tool 13 1 142 onto injector.
Install injection pipe (1).
Install and tighten down screws.
Push special tool 13 1 141 onto plug connections of injectors.
Tighten down union nuts along line.
Tightening torque 13 53 16AZ
.
RA Replacing complete injection pipe (M56)
BMW AG - TIS
14.02.2013 09:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -