3 Series E46 325i (M56) TOUR
Unfasten screws.
Lift out injection pipe (1).
Detach special tool 13 1 142 from injector.
Install injection pipe (1).
Install and tighten down screws.
Tighten down fuel line (5).
Tightening torque 13 53 15AZ
.
Push on terminal strip (4) until it snaps audibly into place.
Push on vent hose (3).
Install holders for plug connections (2).
Push plug connections (1 and 2) into holders.
RA Replacing complete injection pipe (M56)
BMW AG - TIS
14.02.2013 09:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
