3 Series E46 325i (M56) TOUR
Release nuts (1) and remove cover (2).
Installation:
Check seal for cover (2) and replace if necessary.
Unlock plug connection (1) by turning and disconnect.
Caution!
Feed line is pressurized (5 bar).
If necessary, reduce pressure in feed line.
Catch dripping fuel in a suitable container.
Detach feed line (1).
Installation:
Screw connection must be kept absolutely clean!
Tightening torque, 16 12 12AZ
.
Disconnect vent line (1) from fuel tank.
Installation:
Screw connection must be kept absolutely clean!
Tightening torque, 16 12 13AZ
.
RA Removing and installing fuel tank (M56, automatic)
BMW AG - TIS
14.02.2013 09:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
