3 Series E46 325i (M56) TOUR
16 13 015
Removing and installing/replacing tank
leakage diagnosis module (DM-TL) (M56,
automatic)
Necessary preliminary tasks:
•
Remove rear right wheel.
•
Remove rear right wheel arch cover.
Remove connector (1).
Unfasten nut.
Tightening torque, 16 12 11AZ
.
Remove DM-TL with holder and dust filter towards front.
Disconnect vent line (1) from DM-TL here.
Installation:
Coat seal (2) with low-surface-tension water and push onto line (1)
first. Then connect line (1) to DM-TL.
RA Removing and installing/replacing tank leakage diagnosis module (DM-TL) (M56, au
BMW AG - TIS
14.02.2013 10:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
