3 Series E46 325i (M56) TOUR
Release screws.
Reinforcement plate (1) is connected to exhaust system via
rubber mounts and does not have to be removed.
Saloon/sedan, coupé, convertible:
If fitted, detach vacuum hose (1) from vacuum unit (2).
Compact:
There is no vacuum unit fitted here.
Removal of exhaust system must be carried out with assistance of
a second person.
Release nuts on rubber mount of rear muffler on left and right.
Lower exhaust system with lifter and remove.
Installation:
If necessary, install vibration damper, rubber mounts and both
chrome exhaust pipes on new rear muffler.
RA Removing and installing complete exhaust system (M54)
BMW AG - TIS
14.02.2013 10:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -