3 Series E46 325i (M56) TOUR
22 11 011
Replacing left engine mount (M54 / M56)
Remove cover from cable duct and microfilter.
Remove lower section of microfilter housing.
Remove plug and intake hose from air-mass flow sensor.
Release left engine mount from above from engine support arm.
Raise engine with special tool, described in Removing oil sump.
Remove front splash guard.
Release engine mount from front axle support and remove.
RA Replacing left engine mount (M54 / M56)
BMW AG - TIS
14.02.2013 10:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -