3 Series E46 325i (M56) TOUR
Removing rubber mount with collar:
Position special tool 00 8 550 at openings of rubber mount.
Pull out rubber mount with special tools 33 3 324 and
33 3 340 .
Removing rubber mount with slot:
Important!
The arrow on special tool 33 3 228 must point in the pull-out
direction!
Pull out rubber mount with special tools 33 3 144 , 33 3 145 ,
33 3 222 , 33 3 227 , 33 3 228 and nut (1).
Installing rubber mount with slot:
Mark trailing arm eye with a coloured dot (K) as shown in
illustration on left.
Keep rubber mount and trailing arm eye clean and free from oil
and grease.
Important!
Slot in rubber mount must match up with end of arrow on
special tool 33 3 228 !
Insert rubber mount in special tool 33 3 228 and align.
RA Replacing a rubber mount in trailing arm, front
BMW AG - TIS
14.02.2013 12:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -