3 Series E46 325i (M56) TOUR
34 52 516
Removing and installing/replacing control
unit for DSC (MK60)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
DSC (Dynamic Stability Control)
First read out fault memory of control unit and if necessary print
diagnostic record.
Remove DSC hydraulic unit.
Important!
Removing pump motor from valve block is not permitted!
To remove the DSC unit, seal off the line connections with the
plugs (1) provided in the repair kit. This prevents brake fluid from
being discharged from the hydraulic unit, which in turn makes it
easier to bleed the brake system later.
Secure provided retaining lug (2) from repair kit for pump motor
with aid of plugs (3).
RA Removing and installing/replacing control unit for DSC (MK60)
BMW AG - TIS
14.02.2013 13:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -