3 Series E46 325i (M56) TOUR
37 14 512
Replacing rear ride-height sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
After installation:
•
Check headlight adjustment, correct if necessary
Disconnect plug connection (2).
Release nut (3) and disengage jointed rod from sensor lever (4).
Tightening torque 37 14 7AZ
.
Release screws (1) and remove ride-height sensor.
Tightening torque 37 14 6AZ
.
RA Replacing rear ride-height sensor
BMW AG - TIS
14.02.2013 14:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -