3 Series E46 325i (M56) TOUR
Note:
Do not damage metal panels underneath!
Roughly cut side member at bore dia. 16 mm.
Drill off welding spots in area of spare wheel recess.
Expose mating surface, luggage compartment floor/floor
assembly.
Drill off spot welding.
Cut through trunk floor roughly.
Important!
Do not damage connecting parts (e.g. cross-members) and
underlying metal sheets.
RA Replacing complete rear luggage compartment floor (tail panel removed) (E46)
BMW AG - TIS
14.02.2013 14:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -